This is why you should use EasyPrint!
With EasyPrint filament your success rate will be much higher!
Advarsel: Sidste enheder på lager!
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
EasyPrint PETG is the perfect addition for you filament collection. It has many unique features which makes it one of the most versatile filaments in our portfolio. You can make beautiful prints in ""vase mode"" with more than 90% light transmission and almost no haze. EasyPrint PETG doesn´t release any toxic or irritating fumes when printing.
EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ˚C
EasyPrint PETG sticks on BuildTak, PEI sheet and glass plate coated with adhesive spray or glue stick.
|Tolerance||± 0.02 mm|
|Heated build platform required||No, but recommended|
|Print Temperature||210 - 235° C|
|Density||ASTM D1505||1.27 g/cm3|
|Water Absorbation (24 hour immersion)||ASTM D570||0.2 %|
|Rockwell hardness||ASTM D785||116 R-scale|
|Shrinkage||ASTM D955||0.2 - 0.5 %|
|Tensile strenght @ Yield||ASTM D638||53 MPa|
|Tensile strenght @ Break||ASTM D638||26 MPa|
|Elongation @ Yield||ASTM D638||5.0 %|
|Elongation @ Break||ASTM D638||70 %|
|Flexural Strenght||ASTM D790||80 MPa|
|Flexural Modulus||ASTM D790||2150 MPa|
|Izod Impact Strenght (Notched @ 23°(73°F)||ASTM D256||90 J/m|
|Heat Distortion @ 0.455 Mpa||ASTM D1003||74° C|
|Vicat Softening Temperature||ASTM D1525||83° C|
|Light Transmittance||ASTM D1003||90 %|
Der er ingen kundeanmeldelser endnu.