Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
Zortrax Apoller er en intelligent udglattende enhed til dine vidunderlige 3D-udskrifter. Den passer på dit skrivebord og behandler automatisk dine 3D-udskrifter for at opnå en endnu bedre og glattere overflade. Hvert enkelt trin og parameter i udglatningsprocessen styres af intelligente algoritmer. Forædl dine 3D-udskrifter, og bevar objekter, der ser ud og føles i øjenhøjde med sprøjtestøbte dele.
Produktets egenskaber:
- Glat dine 3D-udskrifter automatisk med Zortrax Apoller-fordamperen
- Intuitiv betjening via berøringsskærm og WiFi-tilslutning
- Brug acetone og butanon (MEK) sikkert og miljøvenligt
- 300x250x250 mm stort byggekammer
Ikke på lager
23670
Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:
Jeg ønsker en e-mail når varen kommer på lager
A smart vapor smoothing device.
Device features:
- 300x250x250 mm smoothing chamber
- Zortrax SVS technology
- MEK and acetone compatibility
- Intuitive touch interface
- Wi-Fi and Ethernet connectivity
- Compatibility with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, and Z-HIPS
- Compatibility with external materials including ABS, ASA, and HIPS
- Advanced vapor circulation system
- ATEX compliant safety systems
A smart and safe device for automated vapor smoothing
Zortrax Apoller is a smart vapor smoothing device that automatically removes visible layering from FDM 3D prints. It works works with both acetone and MEK. The smoothing process is fully automated and run by proprietary algorithms managing temperature, pressure, and concentration of solvent's vapors at all times. First, the model has to be placed inside the smoothing chamber. Once this is done, the chamber is heated enough to vaporize the solvent deposited in a sink below the glass tray. Vapors are then circulated spiraling upwards to evenly cover the model. Solvent's vapors condensate on surfaces leaving them with a glossy or mat finish, depending on the filament used. Finally, Zortrax Apoller dries the prints out to make them ready to use straight out of the chamber. Combined weekly output of 4 typical FDM 3D printers can be automatically smoothed within one day. Safety systems have been designed to meet the high standards required by the ATEX 2014/34/EU Directive regulating the equipment intended for explosive atmospheres.
Compatible filaments: ABS, ASA, HIPS
Compatible solvents: Acetone, Butanone (MEK)
Compatible Zortrax filaments: Z-ABS, Z-HIPS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro
| Mærke | Zortrax |
| Weight and physical dimensions | |
|---|---|
| Device (W x D x H) | 671 x 396 x 388 mm (26.4 x 15.6 x 15.3 in) |
| Internal dimensions | 340 x 270 x 260 mm (13.4 x 10.6 x 10.2 in) |
| Device weight | 30 kg (66 lb) |
| Process | |
| Maximum working temperature | 90° C (194° F) |
| Minimum working temperature | -20° C (-4° F) |
| Minimum absolute working pressure | 0.4 bar |
| Ambient operation temperature | 15 - 30° C (59 - 86° F) |
| Storage temperature | 0 - 35° C (32 - 95° F) |
| Electrical | |
| AC input | 110 V ~ 13.6 A 50/60 Hz |
| Power supply parameters | 24 V DC @ 14 A, 500 W |
| Maximum power consumption | 1500 W |
| Device | |
| Build volume | 300 x 250 x 250 mm (11.8 x 9.8 x 9.8 in) |
| Connectivity | Wi-Fi, Ethernet, USB |
| Operating system | Android |
| Processor | Quad Core |
| Touchscreen | 4'' IPS 800 x 480 |
| Solvent compatibility | Aceton, MEK |
| Available materials | Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, Z-HIPS |
