This is why you should use EasyPrint!
With EasyPrint filament your success rate will be much higher!
Advarsel: Sidste enheder på lager!
EasyPrint VALUE pack contains 4 x 500 gram spools in four diffrent colors. You get White, Black,, Red and Blue.
Spool fully compatible with all Flashforge printers.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
|Farve||Hvid, Sort, Rød, Blå|
|Tolerance||± 0.02 mm|
|Heated build platform required||No|
|Print Temperature||185 - 220° C|
|Weight Filament||4x 500g ( Total 2 kg )|
|Total lenght on spool||170 m +/- 1%|
|Spool Size||180 x 54,5 mm|
|Spool Hub Diameter||21mm or 54 mm ( Adapter included ) Fits Flashforge printers|
|Empty spool weight||122g|
|Melting Point||GB/T19466.3-2004||175 - 179° C|
|Glass transition temperature||GB/T19466.3-2004||60 - 62° C|
|Tensile strenght @ Yield||GB/T1040-1992||63 MPa|
|Elongation @ Break||GB/T1040-1992||6 %|
|Flexural Strenght||GB/T1040-1992||92 MPa|
|Izod Impact Strenght||GB/T1040-1992||3,5 KJ/m2|
Der er ingen kundeanmeldelser endnu.