0
Vare:
Varer:
(tom)
Ingen varer
Fastlægges senere
Forsendelse
0,00 DKK
Moms
0,00 DKK
I alt
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Antal
I alt
Der er 0 varer i din kurv Der er 1 vare i din kurv
Varer i alt
(inkl. moms)
Forsendelse i alt (inkl. moms)
Fastlægges senere
Moms:
0,00 DKK
I alt
(inkl. moms)
CreatBot Tube Connector med push-fitting
På Fjernlager
22191
Skriv bedømmelse
Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot / Creatbot /
Printing
| Print Technology: | Fused Filament Fabrication (FFF) |
| Build Volume: | 120 x 135 x 100 mm(Width x Depth x Height) |
| Layer Resolution: | 0.1 – 0.4mm |
| Positioning Accuracy: | X 0.012mm Y 0.012mm Z 0.004mm |
| Extruder Quantity: | Single Extruder |
| Nozzle Diameter: | 0.4mm |
| Print Speed: | 10mm/s - 70mm/s |
| Travel Speed: | 10mm/s - 70mm/s |
| Supported Print Materials: | WANHAO Branded PLA, PLA Wood |
Temperature
| Ambient Operating Temperature: | 15°C – 30°C; |
| Operational Extruder Temperature: | 170°C - 260°C |
Software
| Slicer Software: | Cura Wanhao Edition |
| Cura Input Formats: | .STL, .OBJ, .DAE, .AMF |
| Cura Output Format: | .GCODE |
| Connectivity: | Micro SD Card, USB port (Firmware updating only |
Electrical
| Input Rating: | 85~264V AC, 47~63HZ, 0.95A/115VAC 0.56A/230VAC |
Physical Dimensions
| Printer Frame Dimensions: | 325 x 240 x 380 mm(Width x Depth x Height) |
| Weight: | 7 KG |
