Nyhed Bambu Lab Smooth PEI Plate (Dual sided) - X1/P1/A1

Bambu Lab Smooth PEI Plate (Dual sided) - X1/P1/A1

Bambu Lab Bambu Lab

PEI byggeplade til Bambu Lab X1 Serien / P1 Serien / A1

  • fantastisk vedhæftningsevne
  • Kan bruges til flere materialetyper
  • Glat overflade finish

Flere detaljer

På lager online & butik

40-045

395,00 DKK

inkl. moms

Bambu Smooth PEI Plate, High Z-axis precision printing, Smooth and matte surface finish

 

High Z-axis Precision Printing

The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise alignment and tight tolerances are crucial.
Surface Finish

Smooth and Matte Surface Finish

The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.

Compatible with Various Filaments

PEI enables printing not only with common materials such as PLA, TPU, PETG, but also with materials that require high temperatures like ABS and Nylon.

Note: Please apply glue to prevent the sheet from tearing if printing with filaments other than PLA.

Reliable Magnetic Adhesion to Prevent Warping

The Bambu Smooth PEI Plate features a 0.5mm-thick spring steel plate that enhances magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing. It also helps when printing larger models with materials that are prone to warping such as ABS, PC, and Nylon.

Considerations

  • Please note that with the Smooth PEI Plate on the A1 there is a higher risk the plate curling from the corners, or the printed models to detach from the plate. This is caused by the thicker Smooth PEI applied to the plate, which will increase the distance from the bed magnets and lower the magnetic attraction.
  • If bubbles appear on the bottom of the sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
  • Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
  • Do not clean the Smooth PEI with Acetone, as it will damage the PEI surface.
  • Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
  • Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
  • The Smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Temperature Glue Stick Required?
PLA/PLA-CF/PLA-GF 45~60℃ No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue
ABS (not for A1 mini) 90~100℃ Glue Stick/Liquid Glue
ASA (not for A1 mini) 90~100℃ Glue Stick/Liquid Glue
TPU 35~45℃ Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue
PC/PC-CF (not for A1 mini) 90~110℃ Glue Stick
PA/PA-CF/PAHT-CF (not for A1 mini) 90~110℃ Glue Stick
PET-CF (not for A1 mini) 80~100℃ Glue Stick/Liquid Glue

Installation Steps for X1 Series/P1 Series/A1

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform

Installation Steps for A1 mini

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform

Skriv bedømmelse

Bambu Lab Smooth PEI Plate (Dual sided) - X1/P1/A1

Bambu Lab Smooth PEI Plate (Dual sided) - X1/P1/A1

PEI byggeplade til Bambu Lab X1 Serien / P1 Serien / A1

  • fantastisk vedhæftningsevne
  • Kan bruges til flere materialetyper
  • Glat overflade finish

Skriv bedømmelse

Product Specifications

Material Smooth PEI Sheet + Magnetic Spring Steel Plate
Surface Temperature Resistance Up to 120℃
Thickness Smooth PEI Sheet - 0.125mm
Spring Steel Plate - 0.5mm/0.4mm
Usable Print Size 256*256mm
180*180mm
Packaging Size 300*270*17mm
220*190*15mm
Packaging Weight 0.45kg
0.23kg