PrimaSelect METAL - 1.75mm - 750 g - Brass

PrimaFilaments PrimaFilaments

PrimaSelect METAL - 1,75 mm - 750 g - Messing

Flere detaljer

Ikke på lager

22611

379,00 DKK

inkl. moms

Få besked når varen er på lager

Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:

Jeg ønsker en e-mail når varen kommer på lager
PrimaSELECT Metal is a new exciting type of fi lament which let you take 3D-printing to a new level. In this new material we have introduced a filament that contains 80% metal powder! Needless to say, this material is as close to real metalas you can come in the filament industry for FDM/FFF printers. SELECT Metal is available in Bronze, Copper and Brass.

There´s many benefi ts by using metal powder. You will experience a real metal feel when you touch it and it also have that cold feeling that you can have when you touch copper or bronze. When it comes to weight SELECT Bronze/Copper/Brass is about 3-4 times heavier than regular PLA which also enhances the feeling of real metal. Thanks to the metal powder there´s also very low shrinkage when printing with this filament

You can use SELCT Bronze/Copper/Brass in almost any FDM printer on the market today and the filament has been tested in a number of di erent set ups with both Bowden and direct drive printers. Due to the abrasive nature of metal we recommend that you use a hardened steel nozzle* with this filament. It prints great with a regular brass nozzle also but the wear and tear is bigger and the risk for wearing out your nozzle increases.

Why should I use PrimaSELECT Metal?
Easy to print
Contains 80% real metal for a genuine look and feel
Works on most 3d-printers
PLA based
Easy to polish and post process
Can print with retraction


INFORMATION:

SELECT Bronze/Copper works great without a heated bed, but if you have it we recommend a setting of 35-60 °C

Post processing is really fun with this filament as you can make it look just like a cast molded model. When the print is done it is looks almost like clay, but then you can use some
techniques to bring out that metal gloss. A rotary tumbler is the easiest way of handling the fi nished print. You can just tumble it for a few hours or until you have the fi nish you are looking for.

You can also use some fine grit sand paper (600) and polish your print to desired fi nish. Polish the model with sand paper and water. The longer you polish, the better the shine. You can finish with some metal polish for that perfect look.

PrimaSELECTMetal sticks on BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECTMetal is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister. PrimaSELECTMetal are available in diameter sizes of 1.75 mm and 2.85 mm. Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.
Mærke PrimeSELECT METAL
Materiale PLA
Diameter 1.75mm
Farve Messing
Vægt 750g
PrimaFilaments / PrimaFilaments / PrimaFilaments / PrimaFilaments / PrimaFilaments / PrimaFilaments / PrimaFilaments / PrimaFilaments / 

Skriv bedømmelse

PrimaSelect METAL - 1.75mm - 750 g - Brass

PrimaSelect METAL - 1.75mm - 750 g - Brass

PrimaSelect METAL - 1,75 mm - 750 g - Messing

Skriv bedømmelse

Material Metal
Diameter 1.75mm
Tolerance ± 0.05 mm
Heated build platform required Recommended
Print Temperature 210 - 235 °C
Melting Temperature 150 °C ± 10°C
Weight Filament 750 g
Spool Size 200 x 55 mm 
Spool Hub Diameter 53 mm