3DXTECH CARBONX™ CF-ABS. 1.75mm. 750g. Black

Benefits of CarbonX™ ABS+CF Include:

• Stiff, high-modulus, industrial-grade parts off many 3D printers available on the market today
• Greatly improved stiffness, modulus, and dimensional stability thanks to the addition of carbon fiber reinforcement
• Easier to print than most industrial-grade materials
• Parts can be smoothed with acetone vapors
• Higher melting point than PLA or PETG

Abrasive Material

This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.

Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal. Hardened steel nozzles can often be inexpensive and easily installed depending on your printer manufacturer's instructions.

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

• Extruder: 220-240°C
• Bed Temp: 100-110°C
• Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
• Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
• Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
• Heated Chamber: Recommended, a chamber helps reduce warping.
• Supports: Water soluble AquaTek X1 USM works great for complex parts.
• Drying Instructions: 80°C for 4 hours.