|DDX Adapter Set For Creality CR-10S Pro||+400,00 DKK|
På lager online & butik
Advarsel: Sidste enheder på lager!
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.
This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.
The DDX will be compatible with most Creality 3D printers from Ender and CR series. The DDX requires an adapter set for each model, or set of models. Specific hotends, other than the original, will also need a specific adapter.
To be compatible with Creality 3D printers the DDX requires an adapter set.
The hotend that ships with the Creality CR-10S Pro is the only that does not require an adapter. Please be aware that models without write access to the EEPROM, like the Ender-3 and CR-10, do not allow upgrading the hotend to Copperhead™ or Mosquito™.
The DDX was designed to allow space for the bed probe to be attached to the x-carriage. In models where there is no space to attach a bed probe, like the BLtouch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX.
This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG. Bondtech’s unique Dual-Drive technology in the BMG extruder, combined with a genuine E3D’s v6 HotEnd gives you a direct drive extruder with problems free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.
Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling. With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.
For ease of setup the kit is attached to the carriage with only 2 screws.
Der er ingen kundeanmeldelser endnu.