FilRight Designer WOOD - 2.85mm - 500 g - Natur - SoluNOiD.dk
  • FilRight Designer WOOD - 2.85mm - 500 g - Natur - SoluNOiD.dk
  • FilRight Designer WOOD - 2.85mm - 500 g - Natur - SoluNOiD.dk

FilRight Designer WOOD - 2.85mm - 500 g - Natur

FilrightFilright

160191

With FilRight Designer WOOD filament you print parts that feel and smell like wood. This is because this 3D printing material consists of a combination of PLA and wood fibers.

Flere detaljer

På lager

240,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

FilRight Designer WOOD filament

Printing parts with your 3D printer that feel and smell like wood? FilRight Designer WOOD makes it possible. This filament consists of a combination of PLA filament and wood fibers.

Always a unique product with WOOD filament

By choosing different wood fibers, you determine yourself which wood type (s) and the color you are going to print. The 3D-printed object is therefore always unique and fully meets your needs.

Other advantages of WOOD filament

FilRight Designer WOOD filament is easy to use and completely biodegradable.

Colors and spool sizes  

FilRight Designer WOOD is delivered on a 500 gram spool. This filament is available in different colors and in both 1.75 and 2.85 mm diameters. Let us know if you are looking for other colors and/or spool sizes. These are available on request in most cases.

Properties of FilRight Designer WOOD filament:

  • Feels and smells like wood
  • Biodegradable
  • Printable at low temperature

Specifications

FilRight Designer WOOD filament can be printed at a reasonably low temperature, namely between 205°C and 235°C. The use of a heatbed is required (recommended temperature between 40°C and 60°C). To avoid possible adhesion problems of the 3D prints and warping, we recommend that you always use an adhesive such as PrintaFix adhesive spray.

A TDS is available for technical specifications regarding WOOD filament.

Note: To print with FilRight Designer WOOD filament a nozzle with a minimum diameter of 0.4mm is required.

Delivery

WOOD filament - like all other FilRight filaments - is delivered on a transparent spool. This makes it always visible how much WOOD filament is left. The spool is completely sealed and packed in a cardboard box, so that any damage during transportation is prevented.

Want to know more about FilRight Designer Wood filament? Then contact us.

MærkeFilRight™
MaterialeWOOD
Diameter2.85mm
FarveNatur
Vægt500g
Print temperatur205°C - 235°C
Opvarmet seng krævetJa
Anbefalet temperatur på seng40°C - 60°C
Byggeplade overflade klæbemiddelAnbefalet
Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright /

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

FilRight Designer WOOD - 2.85mm - 500 g - Natur

FilRight Designer WOOD - 2.85mm - 500 g - Natur

AcceptérCookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE