PrimaCreator Value Flex UV Resin - 500 ml - Skin

PrimaCreator PrimaCreator

24598

Når du ønsker forbløffende resultater til lavere omkostninger end mange andre mærker - skal PrimaCreator VALUE Resin være dit første valg!

Flere detaljer

På lager

341,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.

Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

  • In a UV light curing chamber, it will take about 2-5 minutes.
  • In sunlight, 10-20 minutes.
  • In daylight on a cloudy day it can take up to 60 minutes.
Mærke Prima Creator
Materiale FLEX
Farve Hudfarvet
Volumen 500ml
Lager Online
Bølgelængde 405nm
Flexural modulus 1.882 - 2.385 MPa 
Flexural strength  40-70 MPa
Hot deformation temp. 80 ℃
Thermal expansion 95*E-6
Volume shrinkage 3.72 - 4.24%
Linear shrinkage 1.05 - 1.35%
Tensile strength 30 - 52 MPa
Tensile modulus 1.779 - 2.385 MPa
Elongation at break 130%
Hardness (Shore D) 65 - 75D
Glass transition temp. 100 ℃
Density 1.05-1.25g/cm3
Notched impact strength 41-48 j/m
Viscosity 150-300 MPa·s   
Curing time 4 - 12s for layer thickness 0.05 mm
Bottom layer 40 - 60 s
Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / 

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

PrimaCreator Value Flex UV Resin - 500 ml - Skin

PrimaCreator Value Flex UV Resin - 500 ml - Skin

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE