FilRight Pro PLA+ - 1.75mm - 750 g - Metallic Grå

Filright Filright

180016

FilRight Pro PLA+ filament is stronger than FilRight Maker PLA, adheres perfectly to the print bed and has very low shrinkage. This PLA+ filament is therefore very suitable for professional use.

Flere detaljer

På lager

240,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

FilRight Pro PLA+ filament

FilRight Pro PLA+ filament is stronger than FilRight Maker PLA filament and specially developed for professional use. The adhesion to the print bed is excellent (tested at room temperature) and the shrinkage is very low. Because of this - and because of the small diameter tolerance - FilRight Pro PLA+ filament can be printed on almost every brand and model (FDM) 3D printer.

Why 3D printing with PLA filament?

Because PLA filament is easy to print, the popularity of this 3D printing material keeps increasing rapidly.   

The green plastic

PLA (Poly Lactic Acid) filament is also called the green plastic. This biopolymer is made from corn starch, is biodegradable and non-toxic. In addition to the benefits for the environment, it also has positive effects on the printing environment. No unpleasant odors are released during printing with PLA+ filament. The space in which the 3D printer is located will even smell slightly sweet.

The delivery of FilRight Pro PLA+ filament

FilRight Pro PLA+ filament is delivered on a sealed transparent 750 gram spool, packed in a specially designed cardboard box so that the filament is not damaged during transport. FilRight Pro PLA+ filament is available in many different colors and in both 1.75 and 2.85 mm diameters.

Colors and spool sizes that are not shown on our website are often available on request.

Specifications

To achieve the best results, printing with FilRight Pro PLA+ filament, we recommend setting the 3D print temperature between 180°C and 220°C. A heatbed is not required when printing with PLA+ filament, but it is recommended. If you use a heatbed, we advise you to set the temperature between 35°C and 60°C. 

Properties of FilRight Pro PLA+ filament:

  • Biodegradable
  • No bad smell
  • Easy to print
  • Hardly shrinks
  • Stronger than FilRight Maker PLA filament
  • Absorbs water

An MSDS and a TDS are available with specifications related to PLA+ filament.

Want to know more about FilRight Pro PLA+ filament? Then contact us.

Mærke FilRight™
Materiale PLA
Diameter 1.75mm
Farve Metallic grå
Vægt 750g
Print temperatur 180°C - 220°C
Opvarmet seng krævet Nej
Anbefalet temperatur på seng 90°C - 110°C
Byggeplade overflade klæbemiddel Anbefalet
Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright /

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

FilRight Pro PLA+ - 1.75mm - 750 g - Metallic Grå

FilRight Pro PLA+ - 1.75mm - 750 g - Metallic Grå

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE