Denne vare er ikke på lager i øjeblikket
Advarsel: Sidste enheder på lager!
Tilgængelighedsdato:
Do you print regularly and are you looking for a premium PLA filament of good quality that is easy to use as well? Then choose FilRight Maker PLA filament. Because of the good adhesion to the printbed and the very low shrinkage at room temperature, this material is extremely suitable for anyone who is enthusiastic about starting with 3D printing.
FilRight Maker PLA filament is suitable for both the novice as well as the advanced user.
PLA (Poly Lactic Acid) filament is fully biodegradable and non-toxic. That is why it is also called the green plastic. During the printing no unpleasant odors are released, in fact, the room where the 3D printer is located will smell slightly sweet.
Due to its very small diameter tolerance, FilRight Maker PLA filament is suitable for almost all (FDM) 3D printers.
The print temperature of FilRight Maker PLA filament is between 180 and 220°C. A heatbed is not required but is recommended (temperature at 35°C - 60°C).
FilRight Maker PLA filament is supplied on a 1000 gram spool. This PLA filament is available in different colors and in both 1.75 and 2.85 mm diameters. The spool that is used is transparent, so you can always see how much PLA filament is left to make 3D prints with. To ensure that the spool is delivered without damage, it is completely sealed. The entire package is delivered in a cardboard box specially designed for FilRight filaments, which is also well packaged.
Other colors and spool sizes are available on request.
A technical data sheet is available for more technical specifications regarding PLA filament.
For a more advanced PLA filament, we recommend using FilRight Pro PLA+ filament. This is a high-end print material, specially developed for professional use. Click here For more information.
Want to know more about FilRight Maker PLA filament to use for making 3D prints? Then contact us.
| Mærke | FilRight™ |
| Materiale | PLA |
| Diameter | 1.75mm |
| Farve | Grøn |
| Vægt | 1000g |
| Print temperatur | 180°C - 220°C |
| Opvarmet seng krævet | Nej |
| Anbefalet temperatur på seng | 35°C - 60°C |
| Byggeplade overflade klæbemiddel | Anbefalet |
Der er ingen kundeanmeldelser endnu.
