FilRight Engineering Nylon - 2.85mm - 500 g - Klar

Filright Filright

170301

FilRight Engineering Nylon filament is an extremely strong industrial grade material. Resistant to UV and many chemicals.

Flere detaljer

På lager

325,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

Nylon filament – FilRight Engineering 

Nylon; Perhaps one of the most versatile printable materials that can be used for a wide range of applications. Extremely strong and very durable.

FilRight Engineering Nylon is a variant of PA12 optimized for 3D printing. We have chosen not to offer "normal" PA12 nylon, but a superior printable version created by our fantastic development team.

FilRight Engineering nylon filament is based on a type of industrial nylon and is therefore extremely suitable for a (semi) professional user who is looking for the perfect mix of printability and mechanical properties.

The applications of FilRight Engineering Nylon filament

Components printed with FilRight Engineering Nylon filament can be used for industrial applications, where durability is very important.

  • Mechanical components
  • Prototyping
  • Replacement parts

Properties

  • High impact resistance and wear and scratch resistance
  • Good resistance to a multitude of chemical substances (including acids, alkaline and organic solvents) and UV
  • Extremely strong
  • Very good dimensional stability
  • Very low moisture absorption
  • Contact with food and water is allowed. (product is not produced according to standards that concern contact with food.)
  • Based on a nylon used in the industry 

Printing with FilRight Engineering Nylon filament

To achieve the best results with FilRight Engineering Nylon we have some printing advice below for you.

  • Nylon filament should be dried before use, especially after a long period of non-use. Polyamides are known for their moisture absorption. To get the best result, dry the amount of filament you need in a hot air oven for 2-3 hours at 110-130˚C. Make sure you remove the filament from the spool first, as the spool will melt at a temperature below 110˚C.
  • The recommended heat-bed temperature is 80-100˚C. Higher is also allowed.
  • Nylon filament does not adhere well to a glass plate. Use PrintaFix adhesive sprayor a LokBuild printing surface.
Mærke FilRight™
Materiale NYLON
Diameter 2.85mm
Farve Klar
Vægt 500g
Print temperatur 240°C - 260°C
Opvarmet seng krævet Ja
Anbefalet temperatur på seng 80°C - 100°C
Byggeplade overflade klæbemiddel Anbefalet
Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright / Filright /

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

FilRight Engineering Nylon - 2.85mm - 500 g - Klar

FilRight Engineering Nylon - 2.85mm - 500 g - Klar

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE