Fillamentum Nylon FX256 "Vertigo Grey"

Fillamentum | addi(c)tive polymers Fillamentum | addi(c)tive polymers

NYL_175_VG

Fillamentum Nylon FX256 er et materiale til FFF (også kendt som FDM) 3D-printteknologi.

Den største fordel ved denne filament er, at det er et utroligt holdbart og alsidigt 3D-materiale. Fleksibel når et tyndt lag, men med meget høj vedhæftning mellem lagene. Dens lave friktionskoefficient og høje smeltetemperatur gør det til et fremragende valg til udskrivning af funktionelle og tekniske dele.

Flere detaljer

På lager online og i butik

389,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

Fillamentum Nylon FX256 is a material for the FFF (also known as FDM) 3D printing technology.

The main advantage of this filament is that it is an incredibly durable and versatile 3D printing material. Flexible in a thin layer, but with very high inter-layer adhesion. Its low friction coefficient and high-temperature resistance make it an excellent choice for printing functional and technical parts. This material has exceptional chemical resistance. It can be also used for contact with car fluids.

Product features:

  • High impact resistance also at low temperatures (from -40 °C)
  • Resilience
  • Lower moisture absorption than other PA
  • Good dimensional stability
  • Tensile strength 45 MPa/50 %
  • Abrasion resistance 48 mm3
  • Heat resistance (Vicat) 140 °C
  • Chemical resistance - fuels, ketones, oils, salts, hydrocarbons, even at elevated temperatures

HIGH-TECH FILAMENT MADE FROM POLYAMIDE 12

Excellent functional properties for the most resistant prints. The material retains its properties under a wide range of temperatures. Unmatched chemical resistance, even at elevated temperatures. Guarantees the high-quality of printed objects.

Advantages

  • High functionality of the 3D printed object - special properties, long life of the material
  • Printing properties - strong interlayer adhesion, no odour
  • Mechanical properties - durable, tough, crystalline, but resilient in the thinner layer
  • Low density
  • Impact resistance - notched impact strength is the same at 23 and -40 °C
  • Chemical resistance - withstands hydrolysis, ionizing radiation, ozone, neutral and alkaline media
  • Moisture absorption - lower than in the case of polyamide 6
  • Safe for food contact applications - can be used in contact with food, hot water resistance
  • Environmentally friendly material - recyclable, bio-based, BPA free, styrene free
Mærke Fillamentum
Materiale NYLON
Diameter 1.75mm
Diameter tolerance +/- 0,05 mm
Farve Grå
Vægt 750g
Print temperatur 235°C - 260°C
Opvarmet seng krævet Ja
Anbefalet temperatur på seng 80°C - 105°C
Lager Butik

Material Data:

 Material density:  1.01 g.cm-3
 Tensile Strenght:  45 MPa
 Tensile Modulus:

 1400 MPa

Tensile strain at break

 >50%

 HDT at 0.45 MPa  110°C
Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / Fillamentum / 

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE