Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology.
Product features of Magigoo adhesive :
Advarsel: Sidste enheder på lager!
Magigoo PA is designed for professional use, to work exclusively with
Polyamide filaments.(Nylon) The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Why Magigoo PA?
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.
Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.
Nylon filaments prove to be challenging materials for FDM printing due to their lower
adhesion to conventional 3D-printing build surfaces and their higher tendency to warp.
Furthermore there are several classes of PA filaments each behaving differently.
MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was
developed to work with a wide number of PA types
Der er ingen kundeanmeldelser endnu.