Magigoo HT - The 3D printing adhesive

Magigoo Magigoo

24336

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology.
Product features of Magigoo adhesive :

  • Pen with adhesive makes your 3D prints stick to the surface easily
  • Reduces warping to a minimum
  • Save time, filament & nerves

Flere detaljer

På lager

306,00 DKK

inkl. moms

Køb for 750,00 DKK mere for at få fri fragt

WHAT: MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

WHY:

High temperature materials such as PEEK are advanced engineering thermoplastics which offer improved mechanical and chemical stability at elevated temperatures when compared to regular thermoplastics. Other materials include PEKK, Ultem and PPSU and their carbon/glass fibre reinforced counterparts. Owing to their high temperature and other exceptional properties these materials are highly sought after in high temperature and high performance engineering applications such as in the automotive and aerospace industries. Additionally these material are also sought after in the chemical, petrochemical, medical and research applications.

High temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high temperature properties. MAGIGOO HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures.

HOW:

MAGIGOO HT has been designed and tested to work with build-plate temperature of 150 °C or lower.

  • Shake the bottle.
  • Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
  • Print according to the filament/printer manufacturers recommendations
  • Allow to cool and remove. The print should pop right off
  • Clean - Use a damp cloth to wipe off.

SAFETY:

Using this product with other than PEEK filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results.

Tips:

For larger prints a 20 mm brim is recommended

Magigoo HT was designed for glass surface but also works on high temperature garolite and other build-surfaces

Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo / Magigoo /

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

Magigoo HT - The 3D printing adhesive

Magigoo HT - The 3D printing adhesive

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE