Tilbud! Nyhed Anycubic Photon S - DLP 3D printer Hvid

Anycubic Photon S - DLP 3D printer Hvid

Anycubic Anycubic

PHOSWHI

3D print fine detaljer til en fordelagtig pris. Anycubic Photon S DLP er en 3D-printer udstyret med en let anvendelig 2,8 tommer farvetouchskærm. Den printer i resin. DLP står for Digital Light Processing. Under denne proces anvendes en UV-lyskilde til hærdning af flydende resin (polymerisation). Print mange detaljer.

Fremhævede produktfunktioner:

  • Print i fine detaljer
  • Bruger UV-lyskilde til at polymerisere flydende resin
  • Integreret slicer software
  • Høj opløsning - 47 µm
  • Stor 3D-print volumen på 115 x 65 x 155 mm

Flere detaljer

På lager online & i butik

3.500,00 DKK

inkl. moms

3.750,00 DKK inkl. moms

-250,00 DKK

The original Anycubic Photon was a phenomenal success, hitting the mark as an affordable hobbyist resin printer like no other. Excellent print quality and simple user operation made it a go-to for those in need of detailed prints and cost less. Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.

Anycubic Photon-S Highlights

  • 2.8" Full Color Sensitive Touch Screen for real-time previews of print status
  • Inbuilt Offline printing
  • Rapid Slicer- Photon S Workshop.It is superior in terms of slicing speed and operational experience. Ultimate Slice Speed
  • Matrix UV Lights Upgraded UV Module for stable signal transmission , efficient utilization of resin energy and Amazing Print/cure results
  • Dual Z Axis Linear Rail for stronger stability.
  • Anti-aliasing built in to firmware smooths the edge of pixels making the print resolution higher than it actually is.
  • 2K LCD Masking Screen 2560*1440(2K) HD masking LCD gives very fine printing details down to few micrometers
  • Aluminum Build Platform to enhance adhesion
  • Creative structure offers more easiness to leveling: Lower the platform down to the screen; Feel the resistance when pulling the paper in-between; Tighten one screw; Leveling done
  • Dual Filtration System: Inner air-purification system with activated carbon to filtrate bad smell and keep air clean. Dual Fans for Ventilation. 
  • Guaranteed for Noise free 3D Printing.
  • Suitable for UV Resin.
  • Anycubic Photon-S offers a SD card reader and USB connectivity

PrimaCreator Resins works great with Photon S.

Anycubic Photon S

 Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S 

Anycubic Photon S

Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S / Anycubic Photon S /

Mærke Anycubic

GENERAL

  • Printing Technology: LCD-based Masked Stereolithography (MSLA)/LCD Shadow Masking
  • LCD: 5.2-inch 2K
  • Build Volume: 115 x 65 x 165 mm
  • Z-Layer Resolution: 10 microns (recommended)
  • XY Resolution: 47 microns
  • UI: 2.8-inch Color TFT touchscreen
  • Connectivity: USB
  • Build Platform Leveling: Manual
  • Materials: Resins suitable for 405nm LCD-based printers

SOFTWARE

  • Bundled software: Photon Workshop
  • File types: STL

WEIGHT AND DIMENSIONS

  • Weight: 5.9 kg
  • Dimensions: 230 x 200 x 400 mm
Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / Anycubic / 

Der er ingen kundeanmeldelser endnu.

Skriv en anmeldelse

Anycubic Photon S - DLP 3D printer Hvid

Anycubic Photon S - DLP 3D printer Hvid

Acceptér Cookie deklaration på Solunoid.dk Websitet anvender cookies til at huske dine indstillinger, statistik og målrette annoncer. Denne information deles med tredjepart.       LÆS MERE